Measuring device for monitoring vacuum insulation | VIM-2

The Vacuum Insulation Monitoring-2 is a stationary (grid operation) and mobile, battery-operated, highly accurate and long-term stable vacuum pressure gauge based on Spinning Rotor Gauge (SRG) technology.

The Vacuum Insulation Monitoring-2 is a stationary (grid operation) and mobile, battery-operated, highly accurate and long-term stable vacuum pressure gauge based on Spinning Rotor Gauge (SRG) technology.

Introduction

Spinning Rotor Gauges are characterized, among other things, by the option to separate the sensor and measuring head / electronics and thus enable checking static vacuums in a very cost-effective manner. Due to its simplicity, the all-metal sensor can be permanently welded to the vacuum system and delivers reliable measured values even after years of use. Only the ball in the tube, and no electronic components, remain on the chamber to be measured. The system is uniquely resistant to mechanical stress and non-chlorinated corrosive media. Any interaction with the vacuum chamber takes place via electromagnetic forces that lift and accelerate the ball and measure its braking behavior. Corresponding mechanical protection that needs to be attached from the outside is included.

Measurement range

Due to their principle, Spinning Rotor Gauges can be used in pressure ranges from atmosphere to UHV. Due to geometric and electromechanical conditions, however, they are optimized for the pressure range, in which they achieve uniquely high levels of accuracy and long-term stability:

1% accuracy of the measured value between 0.1 and 1 x 10-6 mbar can be achieved if needed, <1% drift per year is typically. The measuring range in general is 10 mbar to 5 x 10-7 mbar, higher pressure values on request.

VIM-2 Specifications
Measurement PrincipleSpinning Rotor Gauge
Measurement range7 Torr to 4 x 10-7 Torr
10 mbar to 5 x 10-7 mbar
Achievable accuracy7 Torr to 0.07 Torr
10 mbar to 0.1 mbar approx. 10 % of reading
0,07 Torr to 7 x 10-7 Torr
0,01 mbar to 1 x 10-6 mbar 1 % of reading
Long term stability< 1 % drift per year
Wetted Material tube/ball1.4404, 1.4034
AlignmentHorizontal
Analog InterfacesUSB Type C, Bluetooth, High Density 15-polig
Digital InterfacesUSB, Bluetooth, RS 232, RS 485
Remote Control /GUIWin7/10
Operating TemperatureElectronics 10 °C to 40 °C (50 F to 104 F)
Measurement head 10 °C to 50 °C (50 F to 122 F)
Sensor tube bakeable until
150 °C (302F) elastomer sealed
450 °C (842F) metal sealed
Power Requirements18 to 28 VDC
Analog Output0 – 10 VDC configurable
Flange TypeKF 25, 8 VCR, welding socket
WeightDevice 1650 g (58 oz), power adapter 510 g (18 oz), head 750 g (26.5 oz)
DimensionsL x B x H = 325 x 275 x 100 mm (13 x 11 x 4 in.)
Power supplyGrid or battery operation
Power ConsumptionMaximum 1.5 A at 24 VDC, typically < 1 A
Run time in battery mode> 2 h
Battery charging timeIn 4.5 h to more than 95 % of current capacity

Key Features

Mission Statement

ph-instruments develops, produces and markets vacuum measurement systems with unique Spinning Rotor Gauge technology for demanding applications in industry, laboratory and scientific research. Our mission is to supply cost-effective, application-driven solutions to our customers. Our core team of vacuum specialists has more than 20 years’ experience in vacuum measurement and process control. Products are designed and produced in Germany and Austria, meeting the highest standards of quality, accuracy, precision and reliability. Innovative technology offers increased energy efficiency and helps protect the environment from CO2 emissions.